Just a quick video showing how to replace the Outer Tie Rod Ends on a 2007 Ford Mustang.

Tools needed:
A large Crescent wrench
13/16″open end wrench
18mm socket wrench with breaker bar
or 18mm open end wrench or ratcheting wrench (like I used in the video)
A Small Sledge Hammer
PB Blaster or other penetrating oil will help loosen the old tie rod end.

Torque specs for the Tie Rod End Nut are 59 ft. lbs.
The Alignment should be checked after replacing the tie rod ends.

Thanks for watching!
Please Subscribe!
-Dan the Fix it Man