Improved Seal and bearing kit that I used in the video:
Complete kit including tool and driveshaft:
Bearing Installation Tool only:
New plastic hub if needed:
Just a quick video showing how I replaced the Washer Tub bearings and shaft seal on a Kenmore Elite Oasis Clothes Washer (Washing Machine).
This is pretty much the same method for Whirlpool, Maytag, Kitchen Aid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Washers.
You will need a putty knife, pliers, tape, 1/4″ and 5/16′” nut drivers, 7/16″ socket with long extensions, phillips screwdriver, 1/4″hex or allen head socket, Large Crescent wrench, Channel Lock pliers, small sledge hammer, long dowel or 2×4.
Thanks for watching!
Please Subscribe!
-Dan the Fix it Man
Song is ”Hello Mr. Princeton” by Otis McDonald